Wall Ladder Factory Direct
Fixed Wall Ladder
Wall-fixed ladders with 8mm steel brackets and a 200mm standoff, made to your wall and height. Free drawing review, quote in 24 hours.
Steel Brackets
Wall Standoff
Rung Pitch
Rung Load Rating
Mounting Detail
Fixed Wall Ladder
A fixed wall ladder bolts directly to the wall face through steel brackets. We hold the rungs clear of the wall so your boots and gloves fit — that gap is the standoff, and it is sized to the standard you build to.
- 8 mm steel brackets, welded to the stringer
- 200 mm standoff from the wall face — standard clearance
- Anchor bolts to brick, block, concrete or steel columns
- Rungs Φ20 mm at 280 mm pitch, 500 mm clear width
Dimensions & Standards
Fixed Wall Ladder Specifications & Dimensions
Standard wall-mount geometry plus custom engineering for standoff, height, and fall-protection requirements. Every figure is on the shop drawing we send for approval.
Wall Ladder, HDG 14m Bath
We build HDG wall ladders up to 14 m for electroplating baths — the same hot-dip line that coats our export tank ladders.
| Specification | Standard Range | Custom |
|---|---|---|
| Height | 2 – 25 ft (0.6 – 7.6 m) | Up to 40 ft engineered |
| Material | Q235B / SS304 / SS316 | Duplex / 6063-T5 AL |
| Rung Diameter | Φ20 mm (0.79″) | Per spec |
| Rung Spacing | 280 mm / 11″ (≤300 mm) | Per project spec |
| Clear Width | 500 mm (19.7″) | Custom width |
| Bracket Thickness | 8 mm steel | Heavier plate |
| Wall Standoff | 200 mm (7.9″) | Per standard / obstructions |
| Bracket Pitch | ≤1,500 mm vertical | Per structural calc |
| Load Rating | 1.5 kN per rung | Engineered |
| HDG Thickness | 85 – 100 μm (ISO 1461) | Heavier coating |
| Finish | HDG / Pickled / Painted | Electropolish (SS) |
| Fall Protection | None under 24 ft | PFAS rail over 24 ft |
Certifications
Compliance & DoCumentation
- OSHA 1910.23 — wall ladder rung & clearance rules
- OSHA 1910.27 — fall protection above 24 ft
- EN ISO 14122-4 — standoff & rung geometry
- BS 4211 & AS 1657 — wall fixings and clearances
Documentation Package
DoC, MTC and structural calcs — included, no paywall.
-
Declaration of Conformity (DoC)
-
Material Test Certificates — EN 10204 3.1
-
Structural Calculations (bracket & anchor loads)
-
Welding Procedure Specifications
-
Surface treatment certificates (HDG per ISO 1461)
Build Options
Ladder Fixed To Wall Options & Configurations
Same bracket geometry, three material families, plus a rail option for tall walls.
Galvanized Steel Wall Ladder
Q235B with 8mm brackets, HDG 85–100 μm. The standard for exterior walls and plant rooms.
Stainless Wall Ladder
SS304 & SS316 wall ladders for food, pharma and marine walls where washdown matters.
Wall Ladder + Fall-Arrest Rail
Over 24 ft, OSHA 1910.28 expects a PFAS or ladder safety system — we mount the rail off the same brackets.
Factory-Direct Wall Pricing
Factory-Direct Pricing & 24h Quote
Itemized by material, bracket machining, finishing and packaging — factory price, no middleman.
Custom quotation priced by weight & process. Industry reference: fixed wall ladders ≈ USD 899–1,099/ton.
Wall Ladders to 50+ Countries
Wall Ladder Global Shipping
-
8–12 × 40ft containers shipped per month
-
VCI rust protection + ISPM 15 heat-treated wooden crates
-
EXW / FOB / CIF terms available
-
15–25 business days production lead time
Common questions
8 mm steel standoff brackets at ≤1,500 mm vertical pitch, fixed with M12 chemical or mechanical anchors.
2–25 ft (0.6–7.6 m) standard; longer runs are engineered from your drawing with the free review.
Q235B steel, SS304/SS316 and 6063-T5 aluminum, with HDG 85–100 μm, pickled or painted finishes.
1.5 kN (≈337 lbf) per rung — bracket and anchor pull-out values are verified in the structural calcs.
DoC, structural calcs and the HDG coating report — OSHA 1910.23/27 and EN ISO 14122-4 compliant, with every order.
Anchoring & Clearance
How a Fixed Wall Ladder Is Fixed to the Wall
A fixed wall ladder lives or dies by its anchoring: bracket steel, anchor size, substrate strength and the standoff that keeps your boots clear. Four numbers cover it.
Clearance Envelope
Send wall photos and substrate details with your drawing — we return the anchor plan, bracket layout and free drawing review before you commit.
Anchoring — Standard Build
| Item | Standard | Note |
|---|---|---|
| Wall bracket | 8 mm steel standoff bracket | Welded to stiles, hot-dip galvanized |
| Anchor bolt | M12 chemical or mechanical anchor | Pull-out verified in structural calcs |
| Substrate | C25 concrete minimum | Brick/block needs a structural review; steel via welded cleats or beam clamps |
| Standoff | 200 mm rung-to-wall | Toe clearance for boots and gloves |
| Bracket spacing | Per structural calcs | Spacing set by height, wind and load |
| Load rating | 1.5 kN per rung | Calcs + DoC ship with the order |
Clearance Envelope
| Zone | Minimum | Why It Matters |
|---|---|---|
| Rung-to-wall (standoff) | 200 mm | Boot and glove clearance while climbing |
| Toe space behind rung | 150 mm | Per EN ISO 14122-4 — no pipes or conduits in the climb zone |
| Clear width | 500 mm | Between stiles, rung to rung |
| Top extension | 42 in (1.07 m) above landing | Clean egress onto the platform |
| Side clearance | 150 mm each side | Keep services, brackets and projections clear of the climb |
Fixed wall ladder questions
M12 chemical or mechanical anchor bolts through 8 mm steel standoff brackets, with pull-out values verified in the structural calcs.
200 mm standoff — the standard toe and glove clearance we build into every fixed wall ladder.
Yes, after a structural review — resin anchors into solid brickwork, or a steel sub-frame where the wall is weak. C25 concrete is the no-review standard.
150 mm toe space behind the rungs, 150 mm each side, and 42 in (1.07 m) of extension above the landing.
Only where the height and your local standard require it — under 24 ft no, above 24 ft a PFAS or ladder safety system is the modern answer.
Proven in real facilities
Reference projects are shown by industry, country and scale. Client names are available on request with approval.
National utility projects — 15+ countries
23 documented projects, 2021-2025 · 2025
All standardsEnergy & industrial clients — Global
500+ projects since 2004 · 2004-2025
Full compliance docsLargest single order — Malaysia
60 units in one project · 2021
HDGGet Your Wall Ladder Quote
Talk to an Engineer
Send wall details — free drawing review and a fixed wall ladder quote in 24 hours.
Why Dengtai Wall Ladders?
Full Compliance Docs
DoC, MTC, structural calcs included free.
24-Hour Quote
Wall-mount geometry reviewed within one day.
Global Delivery
8–12 containers/month. VCI + ISPM 15 packaging.
Request a Wall Ladder Quote
Related Fixed Wall Ladder Pages
Compare wall-mount configurations, install guides, and compliance rules.
Wall Mounted Fixed Ladders
M12-anchor wall mounts, trial-fitted
Cage Fixed Ladders
Φ700 safety cage configurations
Vertical Fixed Ladders
Vertical access up to 14 m
Fixed Ladder Installation
Guides, diagrams & requirements
Ladder Standards
OSHA, BS 4211, EN ISO 14122-4, AS 1657
Talk to an Engineer
Free drawing review, quote in 24 hours